KQ MiniSynth – Oscillators
KQ MiniSynth – All modules
Oscillator Type A (Frequency Modulation)
|
This is an oscillator which outputs a wave pattern of the specific frequency and is equipped with “Frequency Modulation”.
Connectors/Parameters
-
Waveform Buttons
Select a waveform among SineWave, TriangleWave, SquareWave, and SawtoothWave.
-
Freq X
The oscillator multiplies the frequency of the input pitch by this value.
-
Semitone
A value to adjust the pitch by a semitone unit.
-
Detune
A value to adjust the pitch by a cent unit.
-
V/Oct
Select a pitch source or enter a value.
-
F.Mod
The oscillator modulates the frequency with this input.
The parameter is the amount of the input.
-
Sync
The oscillator synchronizes the wave with this input.
-
Gain
A value for changing the output volume.
-
Wave Out
This outputs a wave.
|
KQ MiniSynth – All modules
Oscillator Type B (Pulse Width Modulation)
|
This is an oscillator which outputs a wave pattern of the specific frequency and is equipped with “Pulse Width Modulation”.
Connectors/Parameters
-
Waveform Buttons
Select a waveform among SineWave, TriangleWave, SquareWave, and SawtoothWave.
-
Freq X
The oscillator multiplies the frequency of the input pitch by this value.
-
Semitone
A value to adjust the pitch by a semitone unit.
-
Detune
A value to adjust the pitch by a cent unit.
-
V/Oct
Select a pitch source or enter a value.
-
Pulse Width
The larger the value is, the larger the output wave distortion is.
-
P.W.M.
The oscillator modulates the “Pulse Width” with this input.
The parameter is the amount of the input.
-
Sync
The oscillator synchronizes the wave with this input.
-
Gain
A value for changing the output volume.
-
Wave Out
This outputs a wave.
|
KQ MiniSynth – All modules
Super Saw Oscillator
|
This is a module which contains 7 Oscillators.
Connectors/Parameters
-
Waveform Buttons
Select a waveform among SineWave, TriangleWave, SquareWave, and SawtoothWave.
-
Freq X
The oscillator multiplies frequency of input pitch by this value.
-
Semitone
A value to adjust the pitch by a semitone unit.
-
V/Oct
Select a pitch source or enter a value.
-
Detune
An amount of the frequency difference between oscillators.
-
Gain
A value for changing the output volume.
-
Wave Out
This outputs a wave.
|
KQ MiniSynth – All modules
Low Frequency Oscillator
|
This is an oscillator which outputs a wave at a frequency of 0.005 ~ 99.995Hz.
Connectors/Parameters
-
Waveform buttons
Select a waveform among SineWave, TriangleWave, SquareWave, and SawtoothWave.
-
Freq
An integer part of the frequency.
-
Fine
A decimal part of the frequency.
-
Gain
A value for changing the output volume.
-
Wave Out
This outputs a wave.
|
KQ MiniSynth – All modules
LFO Type B (Tempo Sync)
|
This is an Low Frequency Oscillator which is synchronized with tempo.
Connectors / Parameters
-
Waveform buttons
Select a waveform among SineWave, TriangleWave, SquareWave, and SawtoothWave.
-
Period
The duration of 1 waveform.
-
Gain
A value for changing the output volume.
-
Sync
Reset the waveform when this input turns on.
-
Wave Out
This outputs a wave.
|
KQ MiniSynth – All modules
Noise Generator
|
This is a module which generates White Noise or Pink Noise.
Connectors / Parameters
-
WHITE/PINK
Select White Noise or Pink Noise.
-
POLY
Set the mode “POLY”.
At this mode, the module is treated as a polyphonic one and the outputs are different among voices.
When this is disabled, the outputs are same among voices even if the synth is polyphonic.
-
Out
This outputs noise.
|
KQ MiniSynth – All modules
Recent Comments